“The Ravages Of Time”
The fashion-forward direction of the wood flooring industry is to offer products that look like they’ve already had a history of use. To recreate a time-worn floor in a brand new box is nearly a museum exercise, involving individual attention to each board. There are seven different ways to express this history, and they are often used in combination:
1) Hand scraping.
This is the most popular technique for simulating a foot-worn floor. When wood flooring was exclusively for the rich, and before drum sanders, a method of smoothing a floor was called hand-scraping. This made the wood as smooth as glass. The modern term “hand-scraping” has come to mean the opposite… and it’s a way of gently gouging the surface and edges of flooring planks to mimic the effect of a century or more of footfalls. Remarkably, most of this is in fact is done by hand. The result is that each board has a unique wear pattern.
Wire-brushing mimics the accumulated effects that grittiness (like sand) has when walked on wood. The softer spring wood (the wider of the growth rings) wears off quicker than the harder summer wood, leaving a three dimensional texture that conforms with the grain pattern. Since all beach-front houses go through this history, wire-brushing often accompanies pigmenting the wood to various shades of white and grey. Those colors are associated with the long term bleaching effects of the sun (think driftwood).
All lumber is “rough-cut” from a log using a circular saw or band-saw. These leave saw-blade marks that are routinely smoothed out in downstream production by planers and sanders. Back in the day when most wood flooring was used for its utility, and not additionally for its appearance, the flooring was merely rough cut lumber and those saw marks remained. Over time, much of that evidence is walked off, leaving only a suggestion of its history. This is the look targeted by manufacturers who employ this visual technique… remnants of saw-marks mixed with smooth.
4) Pillowed edges.
When most first floors sat over crawlspaces or dug basements, wood flooring went through some serious seasonal movement. Moisture from below swells the bottom of the wood and results in cupping. Cupping makes the top edges of the floor proud of the surface of the rest of the floor. This becomes a “corner” that your footfall wears down to a broken edge. When the floor flattens out, the edge is now softened (“pillowed” is what they call it in the industry). That edge was often dirtier than the rest of the floor, making each individual plank look like it had a dark border. This distinctive look is called a French Bleed.
5) Character grades.
When fashioning wood was without the benefit of motors they weren’t interested for the sake of appearance in the extra effort, and waste, that results from excluding usable parts of the log. They exercised that discretion for fine furniture, but not for flooring. So color variation, knots, shorter pieces… if it functioned as a wood floor it was used. Many people prefer the presence of these features in their wood floors… these highlight the fact that every piece of wood is unique to all the world and all of history. Because of the excess movement, sometimes these planks cracked in place and manufacturers have even found a way to mimic that history also.
6) Low gloss finishes.
The first stuff to be applied to wood for the purpose of preservation was most likely a plant-based penetrating oil. These finishes are still used today and in Europe they protect about half the wood floors in service. Planet Hardwood holds an inventory from two of the leading flooring oil manufacturers… still plant-based (and VOC-free). One can buff a penetrating oil to a “glow”, but never to a “gloss”… in other words, the appearance of a penetrating oil is never shiny. Even a shiny finish will lose its glossiness over time with use, and that’s “history”. A low gloss level can be achieved with a variety of finishes… not just a penetrating oil.
7) Authentic History.
Woods like American Chestnut and Longleaf Pine are no longer commercially available from the forest. They either succumbed to an imported blight (Chestnut), or were overharvested and never replanted for the purpose of timber (Longleaf). The only modern source for these species are from reclaimed structural timbers remanufactured into flooring. They have a history by definition. These were virgin first-growth trees hundreds of years older than the average age of a modern harvest. The growth rings are tighter and obviously more numerous. Additionally, their service as structural timbers can include other evidence of history like nail-holes or a patina. We buy recycled wood flooring by the flatbed to serve it up at a reasonable cost.
Planet Hardwood shows a wider variety of these wood flooring choices than any showroom in America. No fooling!